Indoor Banners

For stage presentations, halls, Trade Shows and Conferences

Traditional banners are finished with hems and eyelets or rope hems.

PVC is used for economy and simple graphics but has several disadvantages cf fabric banners.

Pull Up Banners (sometimes called Pop Ups- a similar display but where more on-site assembly is required)are ideal where a smaller banner has to be transported by the presenter. The most common size is approx. 850 x 2000 mm. Larger and smaller canisters are available. They come supplied with a carry bag for easy stowage and travel.

We print onto polysatin which gives several advantages over synthetic paper or PVC.

If the banner gets slightly creased it can be ironed flat.

Polysatin lies flat when erected- paper and PVC will curve.

It does not reflect adjacent lights- this is most important for Trade Show display.

Lastly polysatin is ¼ the weight of PVC so results in less weight to carry around.

Polysatin prints superbly.

Fabric Banners

For frequent installation, short term, eg Market Days then polyester fabric banners offer many advantages. Most fabrics, being ¼ the weight of PVC, then they are much easier to hang (require less substantial structures to support them) and store. PVC must be rolled for storage and even then if the roll is crushed the skin will crack.